除尘器新型褶式滤筒的结构优化及系列化设计

以新型褶式滤筒为研究对象,选取滤筒褶数N_2、褶夹角θ、褶高h、过滤风速v为影响因子,除尘器压力损失为响应值,基于响应曲面法分析影响因子对压力损失的影响,建立滤筒除尘器压力损失的预测模型并得到滤筒褶皱结构最优参数。以滤筒内径D、筒体高度D_1为标准尺寸,依据相关国家标准设计滤筒筒体部分;以锥体高度D_2、锥体上圆直径D_3为系列尺寸,利用尺寸变化法设计锥体部分;通过Access软件建立滤筒产品数据库。结果表明:当θ=5.2°,N_2=50,v=0.01 m/s,h=0.035 m时,除尘器压力损失最低;当D_1=1 000 mm,D=320 mm时,D_2和D_3最佳值分别为600,130 mm,故采用D_2/D_1=0.6,D_3/D=0.4的比值设计相应滤筒锥体系列。     

A new deep convolutional neural network model for classifying breast cancer histopathological images and the hyperparameter optimisation of the proposed model

The Journal of Supercomputing - Deep learning algorithms have yielded remarkable results in medical diagnosis and image analysis, besides their contribution to improvements in a number of fields...     

分析型全蒸发器在啤酒挥发性成分测定中的应用

综述了分型全蒸发器技术在啤酒发酵过程中的应用状况，并介绍了分析型全蒸发器模型结构及与之配合使用的连续多分支管。     

欠驱动系统Pendubot的模糊控制策略

本文针对欠驱动Pendubot机器人系统，提出一种简单可靠的摇起及平衡控制策略。通过利用模糊控制及全状态反馈控制技术来分别设计摇起控制器及平衡控制器，其中模糊摇起控制器的设计使得系统的摇起可靠性得到大大的加强，并缩短了响应时间，两个控制器的转换通过转换装置实现。最后的仿真结果验证了算法的有效性。     

THE ELECTROIMPACT COMPACTION OIF POWDERS: MECHANICS, STRUCTURE AND PROPERTIES

An electroimpact compaction method recently developed for powder consolidation is described In terms of the basic principles of electric discharge and dynamic compaction processes. The influence of processing parameters, microstructural characteristics and mechanical properties of preforms obtained are discussed. Mathematical models for the mechanics of compaction, electrical resistance, discharge current variations and comparisons with experimental results are presented. The best set of properties are obtained when electrical discharge is applied to cause interparticle fusion at the instant when dynamic compaction pressure attains its peak level.     

A Multiagent System for the Reliable Execution of Automatically Composed Ad-hoc Processes

This article presents an architecture to automatically create ad-hoc processes for complex value-added services and to execute them in a reliable way. The uniqueness of ad-hoc processes is to support users not only in standardized situations like traditional workflows do, but also in unique non-recurring situations. Based on user requirements, a service composition engine generates such ad-hoc processes, which integrate individual services in order to provide the desired functionality. Our infrastructure executes ad-hoc processes by transactional agents in a peer-to-peer style. The process execution is thereby performed under transactional guarantees. Moreover, the service composition engine is used to re-plan in the case of execution failures. The work presented in this article was supported by the Swiss National Science Foundation as part of the project MAGIC (FNRS-68155), as well as by the Swiss National Funding Agency OFES as part of the European projects KnowledgeWeb (FP6-507482) and DIP (FP6-507483). Authors in alphabetic order     

负载Pd的分子筛催化剂上烷烃的异构化反应

采用吡啶吸附红外光谱和氨程序升温脱附法对负载Pd的几种分子筛催化剂(Pd/,βPd/ZSM-22,Pd/SAPO-11)的表面酸性进行了测定,并以正十二烷为模型化合物,在连续流动固定床微型反应器上考察了这几种分子筛催化剂的异构化反应性能。实验结果表明,Pd/β催化剂的酸量大且具有强酸中心;Pd/SAPO-11和Pd/ZSM-22催化剂的酸强度分布类似,但前者的酸量较小,后者的酸量适中。在正十二烷的转化率为65%左右时,对于单、双甲基C12异构体的选择性,Pd/ZSM-22催化剂与Pd/SAPO-11催化剂相近,高于Pd/β催化剂,而催化活性的高低顺序为:Pd/β>Pd/ZSM-22>Pd/SAPO-11,说明Pd/ZSM-22催化剂比较适合于大分子烷烃的异构化反应。在100mL中试装置上,以大庆减四线糠醛精制油为原料,对实验结果进行了验证。     

自振空化射流提高钻井速度的实验研究

空化射流用于提高钻井速度的可行性研究结果表明，在钻进作业中，利用空泡破裂产生强大破坏作用来提高钻探的效率，其效果显著，可行性高。室内实验表明，自振空化射流在比普通喷嘴射流更深的井底或更高的围压条件下，有更大的起始空化数和更强的空化能力。自振空化喷嘴起始空化数大都在1.0以上，最高达到1.67，而锥形喷嘴最高仅为0.43，围压下其冲蚀效率是锥形喷嘴的1~2倍。现场试验同样证实设计的自振空化射流喷嘴在保护钻头、减少钻头磨损及增加进尺、提高机械钻速方面有显著作用。     

糖化酶制剂辐照性能研究

研究了工业糖化酶制剂经辐照处理后各项性能的变化。结果表明,经2kGy以下剂量的γ射线处理后,可提高其贮存稳定性,改善卫生品质,不影响其正常使用。